CAGE 834B9 DUNS 056429420

“Nothing in life is so exhilarating as to be shot at without result." - Winston Churchill

Charlie TARAC®


• Optically add 0 – 250 mils (0 – 860 moa) to any riflescope without changing rails, rings, cheek position, or 100-m zero, model specific.

• Interchangeable rail and scope mount solutions available, model specific.

• The Charlie TARAC is a periscope that optically shifts your target image higher so you aim higher to compensate for bullet drop.  The result is an optical, not mechanical, elevation gain to shoot beyond your scope’s travel.

• Targets that exceed your scope’s travel, return to zero, deploy the Charlie, and dial the difference.  For example, if you max your scope at 30 mils, but your target requires 44, return to zero, add the Charlie TARAC calibrated at (say) 30 mils, and dial the remaining 14 mils (30 + 14 = 44 mils).

• Macro
L 2.94″ x W 3.65″ x H 3.50″
L 75mm x W 93mm x H 89mm
Rail: 1 lb 8.9 oz | Scope: 1 lb 10.3 oz

• MK8 (Mark 8)

• Color:  Gun Gray


• The Macro Charlie adds an adjustable 0 – 250 mils (or 0 – 860 moa).

• The MK8 adds a turret-adjustable 0 – 175 mils (or 0 – 600 moa).

• The Charlie TARAC purposely reflects – not refracts – light to avoid chromatic aberration and sends light to objective center for superior image quality and brightness, especially in low-light.

• Ideal for values GREATER than 90 mil or 300 moa.

• Units can be calibrated and later reset to any value ranging from 0 – 250 mils (model specific) to match schoolhouse / mission requirements.

• The Charlie covers the objective’s circular outline to make spotting difficult.  Faces are roughed and provide options for camouflage tape to enhance concealment and custom match surroundings.

• Convert Charlies to any mounting solution – rail or scope – in minutes; model specific.  No special tools required.

• Rail mount Charlies also feature a high-end, self-adjusting Bobro QD mount (American Defense available upon request) that can be quickly be swapped and or replaced versus being integral to the housing and requiring an entirely new unit if compromised.

• Components are made in the USA, even our glass.

• Mount the Charlie anywhere in front of the objective (directly in front, inches, or feet in front). 

• Turn and or tilt it degrees without affecting the image (except for cant).  It works with big rails, up to 120 moa, even when the Charlie is level.

• Yields greater weapon cross-compatibility.

• The Charlie TARAC raises the scope center line by 1.3 inches for greater elevation and to minimize the effects of thermal mirage generated from a hot barrel or suppressor for a superior image.

• JTF2 (unconfirmed) – World’s longest-confirmed sniper kill at 3,541 m set Jun 2017, shattered previous record by +1,000 m.

• Charlie Melton, Charlie Mike Precision – 5,000 yds set Sep 2017.
• Paul Phillips, Global Precision Group Consulting – 6,012 yds set Jan 2019.
• James DeVoglaer, Kaian Vista Ranch – 7,070 yds set Sep 2019.
• Chase Stroud, DPI Precision Consulting – 7,141 yds set Aug 2020.


1. Macro

• Add 0 – 250 (or 0 – 860 moa) mils with ultra-high reflectivity mirrors.  Elevation is adjustable using a tall target.

• Starts at $1,399 (includes mount and tactical hard case).  Available as rail or scope mount.

• Elevation is unmatched.

• Features magnets for rapid scope attachment.  Extension bolts provided.

• Interchangeable mounts.

• Moderate weight.  See ‘INTEL’ for Specs.

• Description:  Loosen three (3) bolts attached the lower rod until finger tight.  Turn the adjustment screw clock or counter-clockwise to add or subtract elevation, respectively.  Once crosshair reaches new inch equivalent on tall target (see “Formula”), tighten three (3) bolts to 50 in-lbs.

• Video:  Click here to watch Rex Tibor and John Baker break down the step-by-step procedure.

• Operator’s Manual:  Provided with every unit.  Also, available for download.  See ‘OPTERATOR’S MANUAL’ for details.

• Life-time Support:  TacomHQ will adjust Charlie TARACs anytime free of charge.  Just cover shipping and we will take care of the rest.

Click here to order

2. MK8

• Add 0 – 210 mils (or 0 – 720 moa) with ultra-high reflectivity mirrors.  Elevation is turret adjustable featuring eight (8) clicks.  Dial 5 – 30 mil (or 20 – 100 moa) increments.

• Ideal for snipers, grenade launchers, heavy machine guns, and heavy, low-velocity rounds.

• Available for preorder at $2,599 (includes mount and tactical hard case). 

• Rapid elevation adjustment is unmatched.

• Ballistic points can be set in mil, moa, yards, or meters.

• Rail mount only.

Click here to order


• Charlie TARACs are calibrated to order.  MIL and MOA available. 

• When you order a Charlie TARAC, either:

1) Match your scope’s total usable elevation.  For example, if your scope has 33 usable mils, order a 33 mil Charlie to prevent range gaps.  If a target exceeds your scope’s travel, return to zero, deploy the Charlie, and dial the difference.  This example yields 0 – 66 mils (33 mil Charlie + 33 mil scope).

2) Select a multiple of ‘5’ or ’10’ for simple arithmetic.  For example, if your scope has 33 usable mils, order a 30 mil Charlie, prevents range gaps and having to dial at the edge of your glass, or a 35 mil Charlie and use your scope’s reticle to get a little more top-end.  Ordering a 40 mil Charlie (in this example) increases the gap so if you have a target between 33 and 40 mils, you will not be able to dial it.

Tall-Target Calculator

* Used to confirm elevation or to reset a Charlie TARAC.


• Mount anywhere in front of your objective (directly in front, inches, or feet in front).  However, it is best to keep as close as possible to reduce ambient glare.

• Optimized for 1.50″ (38 mm) scope rings +/- 0.125″ (3 mm).

• Pair the Charlie with a scope on a 0 – 120 moa base despite it being level.

• Use this solution for platforms without an extended rail.

• Scope mount adapters are scope specific and requires a sunshade for permanent integration.  Universally fits both Bravo and Macro Charlies.

• Require >/= 0.25″ (6 mm) clearance.

*IMPORTANT:: Scope mount adapters must be threaded onto objective, not a sunshade.

• Attach a rail mount Charlie to any platform with an extended rail; making it fast and easy to outfit a variety of platforms.

• Scope mount Charlies must be plumbed, which is an added step, but this can be done in 30 seconds using a simple bubble level and it will achieve < 1 MOA accuracy.  Either use your scope’s turrets to dial out the difference or finely tune the adapter until it tracks vertical.

• Turn and or tilt the Charlie degrees without affecting the image.  However, the Charlie is susceptible to cant just like your scope.

Cross-Compatible Optics

• Use the same Charlie TARAC across optics.

• Saves money.

  • Riflescopes (behind Charlie)
  • Night Vision (behind Charlie)
  • Thermals (in front of Charlie)


• Long-standing military service.
• Material:  6061 with critical components machined from 7075.  MK8’s optic touch-points are tungsten-carbide.
• Glass:  Highly scratch resistant mil-spec coating.  They will not fog.
• Temperature Range:  Subzero – 140°F (built do withstand going from cargo hold temperatures to desert heat in minutes).
• Maintenance:  Maintain as you would a scope, but it is purposely designed to be dunked in a bucket of soapy water or gasoline.
• Mount:  Bobro Engineering QR mount.
• Case:  Nanuk tactical hard case.

Click here for details.


• Eliminate optical interference from brakes, suppressors, and thermal mirage for a superior image using the Delta.

• Shift your scope’s line of sight from overlooking your barrel to looking down its side.  (Does not require a Charlie TARAC.)

Click here to order.

• Cross-compatible with Micro and Macro Charlies.  See ‘ATTACHMENT’ for details.

Click here to order

• Cross-compatible with Micro, Macro, and MK8 Charlies.  See ‘ATTACHMENT’ for details.

Click here to order

• Protect your objective and prevent detaching and reattaching your scope mount adapter.

• It magnetically attaches to a scope mount adapter just like the Charlie.

Click here to order

Made in the USA